Terex Genie GRC-12, Руководство по обслуживанию

Страница: 27 / 135

February 2022 Service Manual
Checklist B Procedures
Part No. 1314708GT GRC ™ 15
B-1
Inspect the Batteries
Genie requires that this procedure be performed
every 250 hours or quarterly, whichever comes
first.
Proper battery condition is essential to good
machine performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in component damage and
hazardous conditions.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Bodily injury hazard. Batteries
contain acid. Avoid spilling or
contacting battery acid.
Neutralize battery acid spills with
baking soda and water.
1 Raise the platform to approximately 3 ft / 1 m.
2 Open the battery cover. Rest the cover
against the chassis.
3 Lower the platform until the mast just contacts
the battery cover.
Crushing hazard. Keep hands
clear of the battery cover when
lowering the platform.
4 Be sure that the battery cable connections are
free of corrosion.
Note: Adding terminal protectors and a corrosion
preventative sealant will help eliminate corrosion
on the battery terminals and cables.
1 batteries B5
2 275A fuse F6
3 quick disconnect QD1
5 Be sure that the battery hold downs and cable
connections are tight.
6 Be sure that the battery separator wire
connections are tight (if equipped).
7 Fully charge the batteries. Allow the batteries
to rest 24 hours before performing this
procedure to allow the battery cells to
equalize.
8 Put on protective clothing and eye wear.