Teracom TCW180B, Руководство пользователя, Страница: 9 / 10

x .3.11.0 Pulse2 read-write
Relay 2
pulse state SYNTAX INTEGER (0..255)
x .3.12.0 Pulse3 read-write Relay 3 pulse state SYNTAX INTEGER (0..255)
x .3.13.0 Pulse4 read-write Relay 4 pulse state SYNTAX INTEGER (0..255)
x .3.14.0 Pulse5 read-write Relay 5 pulse state SYNTAX INTEGER (0..255)
x .3.15.0 Pulse6 read-write Relay 6 pulse state SYNTAX INTEGER (0..255)
x .3.16.0 Pulse7 read-write
Relay 7
pulse state SYNTAX INTEGER (0..255)
x .3.17.0 Pulse8 read-write
Relay 8
pulse state SYNTAX INTEGER (0..255)
x .3.18.0 allOn read-write Set all relays On SYNTAX INTEGER (0..255)
x .3.19.0 allOff read-write Set all relays Off SYNTAX INTEGER (0..255)
x .3.20.0 allPulse read-write Pulse all relays SYNTAX INTEGER (0..255)
9.4 Network
OID Name Access Description Syntax
x .4.1.0 deviceIPAddress read-write Device IP address IpAddress
x .4.2.0 subnetMask read-write Subnet Mask IpAddress
x .4.3.0 gateway read-write Gateway IpAddress
x .4.4.0 deviceMACAddress read-write Device MAC Address OCTET STRING (SIZE(6))
x .4.5.0 dhcpConfig read-write DHCP ON/OFF INTEGER { ON(1), OFF(0) }
x .4.6.1.1.0 filterMACAddress1 read-only MAC Filter 1 (Gateway) OCTET STRING (SIZE(6))
x .4.6.1.2.0 filterMACEnable1 read-write MAC Filter 1 ON/OFF INTEGER { ENABLED(1), DISABLED(0) }
x .4.6.2.1.0 filterMACAddress2 read-write MAC Filter 2 OCTET STRING (SIZE(6))
x .4.6.2.2.0 filterMACEnable2 read-write MAC Filter 2 ON/OFF INTEGER { ENABLED(1), DISABLED(0) }
x .4.6.3.1.0 filterMACAddress3 read-write MAC Filter 3 OCTET STRING (SIZE(6))
x .4.6.3.2.0 filterMACEnable3 read-write MAC Filter 3 ON/OFF INTEGER { ENABLED(1), DISABLED(0) }
x .4.7.1.0 VLANStatus read-write VLAN status INTEGER { ENABLED(1), DISABLED(0) }
x .4.7.2.0 VlanId read-write VLAN ID INTEGER (0..4095)
x .4.8.1.0 smtpServer read-write SMTP Server IP address IpAddress
x .4.8.2.0 smtpPort read-write SMTP Server Port INTEGER (0..65535)
x .4.8.3.0 smtpSenderEmail read-write SMTP Sender e-mail address String (SIZE (0..39))
9.5 I/O Setup
OID Name Access Description Syntax
x .5.1.0 relayPulseDuration read-write Global Pulse duration INTEGER (0..255)
x .5.2.0 Relay1description read-write Relay 1 description String (SIZE (0..10))
x .5.3.0 Relay2description read-write Relay 2 description String (SIZE (0..10))
x .5.4.0 Relay3description read-write Relay 3 description String (SIZE (0..10))
x .5.5.0 Relay4description read-write Relay 4 description String (SIZE (0..10))
x .5.6.0 Relay5description read-write Relay 5 description String (SIZE (0..10))
x .5.7.0 Relay6description read-write Relay 6 description String (SIZE (0..10))
x .5.8.0 Relay7description read-write Relay 7 description String (SIZE (0..10))
x .5.9.0 Relay8description read-write Relay 8 description String (SIZE (0..10))
x .5.10.0 digitalInputAction read-write Digital Input Action condition
INTEGER { FALLING(2),RISING(1),
DISABLED(0) }
x .5.11.0 digitalInputTo read-write
Digital Input event receiver's e-mail
address
String (SIZE (0..38))
x .5.12.0 digitalInputSubject read-write Digital Input event e-mail's subject String (SIZE (0..11))
x .5.13.0 digitalInputBody read-write Digital Input event e-mail's body String (SIZE (0..22))
x .6.0 configurationSaved read-write
Configuration save status
SAVED/UNSAVED
INTEGER { SAVED(1), UNSAVED(0) }
x .7.0 restartDevice read-write Restart Device INTEGER { RESTART(1), CANCEL(0) }