10.
Restoring Factory Default Settings
If the IP address or password is forgotten,
TCW180B
can be restored to its original factory default
settings. To do this, please follow the steps below:
•
Turn off the power supply from the unit;
•
Press and hold the RESET button then turn on the power supply;
•
The LED’s Power and Busy will flash 14 times, after that they will turn on. In this moment the
RESET button should be released.
The factory default settings are:
User Name (Admin)
admin
Password (Admin)
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
disabled
readCommunity
public
writeCommunity
private
11.
Firmware update
TCW180B
supports remote firmware update. To update the device follow the steps below:
-
Download the
TCW1XX_Update_Tool
program from
www.teracom.cc
;
-
Download the latest firmware version file (*.cod) from
www.teracom.cc
;
-
Start the program and update the firmware.
Attention! Don’t turn off the power supply during the update. Turning off the power supply will
damage the device.
Rev. 2 – October 2011
