Teracom TCW180B, Руководство пользователя

Страница: 6 / 10

•
IP address, Subnet mask , Default gateway – these fields are active if IP address is static;
•
Host Name
– up to 16 symbols, it appears as a “Subject” in sent e-mails;
•
MAC – device MAC address.
The good practice is to change the default IP address of controller immediately after first power-
on. This will avoid collisions if many devices are used in the same network. It may be necessary to clear
the arp cache, each time you connect a new device to the network. This is done by typing
arp -d
in the
command prompt window of computer.
VLAN and MAC address filtering are supported. Up to 3 MAC addresses (including Default
Gateway) can be active in MAC filtering.
Attention! If you are not familiar with VLAN and MAC filtering leave these sections by default.
To set up the SMTP server details, the following fields should be completed:
•
Mail server [IP:port] – domain or IP address + port of SMTP mail server. To use domain
name, IP address in field DNS must be correct ;
•
E-mail – sender e-mail;
•
Username and Password – authentication details for mail server .
Mail server is considered server for sending mails. Secure Socket Layer is not supported.