Teracom TCW180B, Руководство пользователя, Страница: 7 / 10

8.5 SNMP Setup page
TCW180B supports SNMP v.1 that enables trap delivery to an SNMP management application.
This enables the device to be part of large monitoring and control networks. The possible settings for
“SNMP” section are:
•
SNMP Configuration
– enable/disable SNMP;
•
Read-Write community – performs client authentication;
•
Read-Only community
– performs client authentication;
•
SNMP Traps – enable/disable SNMP trap messages;
•
IP address – IP address of the receiving host
•
Community string – performs client authentication
•
Trap Interval - time interval in seconds for SNMP trap messages;
•
Max. Traps number – maximum number of SNMP trap messages sent, if trap condition is
present
SNMP traps are sent if:
•
event occurs (status change) on Digital Input;
•
restart condition.
8.6
I/O Setup page
The following parameters can be set for the relays:
•
Description – brief description of the output, maximum 10 characters can be used;
•
Pulse Duration – time for relay activation when "Pulse" button on "Monitoring" page is
pressed. This setting applies to all 8 relays.