Tone Commander 6220-TSG-DD Installation Instructions
Page 32
13-280121 Rev. C
Keys
Select KEYS.
Press each key on the telephone (not on the Button Expansion Module), including the dial pad
keys, one at a time.
A letter should appear in the display for each pressed key.
If all keys are operational, the following display will be shown. Press any key to return to the
Terminal Test menu.
If any key fails, or to exit before testing all keys, go off-hook with the handset or unplug the phone.
6030X Button Expansion Module
This option tests the keys and LED indicators on a 6030X Button Expansion Module. It is only available if a
6030X is connected to the phone.
Select 6030X.
Press each key on the 6030X, one at a time.
The key's LED indicator should flash alternately red and green, and a number should appear in
the display for each pressed key.
After all keys have been tested, press any key to exit the test.
You can also exit the test at any time by pressing the
Done
key to return to the Terminal Test
menu or press the
Setup
key to exit Setup Mode.
Done
PRESS EACH KEY TO TEST
OR GO OFF-HOOK TO EXIT
ABCDEFGHIJKLMNOPQRSTUVWX
abcdefghijklmnopqrstuvwx
KEY TEST PASSED
PRESS ANY KEY TO EXIT
PRESS EACH KEY ON 6030X
PRESS DONE TO EXIT
123456789012345678901234
567890
