Tone Commander 6220-TSG-DD Installation Instructions
Page 22
13-280121 Rev. C
Using the dial pad, enter the number you would dial to call the monitored station
.
CLEAR
removes all digits, allowing you to start over.
Press the
Done
key three times to return to the key selection menu or press the
Setup
key to exit
Setup Mode.
Speed Dial Keys
Unused keys not assigned for call appearances or feature activators may be used as Speed Dial
keys. Dialing strings can include network feature activator codes, to simplify the use of features
such as Directed Call Pickup and Call Forwarding. Speed Dial keys may also be programmed
from the User Options menu.
The currently programmed dial string, if any, will be shown in the display.
Enter digits (24 maximum) with the dial pad.
After entering the first digit, pause, or feature activator, the FA softkey will be replaced by CLEAR.
If you need to make corrections while entering numbers, select
BKSP
(backspace) to delete the
previous digit.
CLEAR
removes all digits, allowing you to start over. A Speed Dial key will revert to 'Unused' if
saved with a cleared dial string.
“Smart” Pauses
Pauses are entered with the PAUSE softkey, and are shown in the display as a
P
character. The
first pause in a dial string will wait until the call is answered; additional pauses delay dialing for
one second. Enter multiple pauses to increase the delay time.
Done
5551234P1P12
|BKSP CLEAR PAUSE
|BKSP FA PAUSE
5551234
|BKSP CLEAR PAUSE
