TensCare Perfect PFE, Инструкция по эксплуатации

Страница: 32 / 36

31
21. GENERAL SPECIFICATION
Waveform Asymmetrical rectangular
Amplitude
(over 500 Ohm load)
99.0 mA
+/- 10%
Max intensity 50V zero to peak
Constant voltage over 470-1500 Ohm
Constant current over 160-470 Ohm
Output plug Fully shielded
Channels Single channel
Batteries 2 x AA alkaline (two AA batteries) or 2 x AA NiMH
Weight 75 gms without batteries
Dimensions 120 x 60 x 20 mm
Safety Classification Internal power source.
Environmental Specifications:
Operating:
Storage:
Temperature range: 5 to 40 ⁰ C
Humidity: 15 to 93% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Temperature range: -25-+70 ⁰ C
Humidity: Up to 93% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
TYPE BF
EQUIPMENT
Equipment providing a degree of protection against
electric shock, with isolated applied part.
Designed for continuous use.
This symbol on the unit means “Refer to Instructions for
Use”
IP22
The unit is not water resistant, and should be protected
from liquids.
Complies with EU WEEE regulations
Applied Part
Vaginal and anal electrodes. Optional skin surface
electrode pads. See section 18.
Contact duration: At least 10 minutes.
Note: The electrical specifications are nominal and subject to variation from
the listed values due to normal production tolerances of at least 5%.