TensCare Perfect PFE, Инструкция по эксплуатации

Страница: 22 / 36

21
Caution NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution Do not mix old, new or
different types of batteries as
this may lead to battery leakage or low
battery indication.
Disposal: Always dispose of batteries
responsibly
according to local
government guidelines. Do not throw
batteries onto a fire. Risk of explosion.
13.2. CONNECTING LEAD
WIRE
Insert the lead wire plug into the base of
the unit.
Connect the lead from the base of
the unit to the lead in the probe.
Push the pin ends firmly into the pigtail
ends of the probe lead.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wire are coloured
black or red. This coding is provided for
some professional uses. For most
purposes, the orientation makes no
difference, and you can ignore this
colour coding.
13.3. PREPARING FOR
SESSION
1) Before using perfect PFE you will
need to visit the toilet.
2) Lubricate the metal electrode
surfaces and probe tip with a water-
based lubricant, such as TensCare
Go Gel or water.
Caution: Do not use a silicone
based lubricant on the
stimulation contacts as it may
decrease the effectiveness of the
perfect PFE
’s muscle stimulation.
3) Choose a comfortable position, such
as lying down on your bed on your
side with your knees raised.
Warning: Ensure the perfect
PFE is switched OFF before
inserting the probe.
4) After the wire is securely connected,
insert the probe into your vagina, in
the same way as you would a
tampon, until only the plastic rim at
the base of the probe is visible.
5) The metal parts conduct the
electrical pulse and should be in
contact with the main part of the
muscle at all times. The tissues close
to the entrance are more sensitive,
so you should avoid stimulating
them.