43
continued
Changing basic settings on the base station
Notes:
Block
programming
of all parameters
for the dialling
method
Enter the digit for the desired
block
1
Scroll to menu item 35
“Block programming”
Block 1
Block 2
Block 3
(Priv. PABX)
(Main line 1)
(Main line 2)
Dialling method:
DTMF
PD
DTMF
Dial pause after
exchange code:
0 s
none
none
signal key:
80 ms
no function
250 ms
(short flash)
(long flash)
3
. . .
Standard- and delivery state is Block 1.
Notes:
Setting signal
key “R”
Enter the desired setting
0
Scroll to menu item 36
“Signal key”
DTMF:
0: no function
1: Flash short (80 ms), for functions in a
telephone system
2: Flash long (250 ms), for using
network provider service features
Pulse-dialling (PD): 0: no function
2
. . .
The flash function may only be set in the DTMF dialling
method.
Notes:
Setting base
station settings to
their initial state
(Reset)
Scroll to menu item 38
“Reset base”
C
Press the “Clear” key until
the acknowledgement
tone sounds.
The following are reset: Dialling method: DTMF, base station
bell volume: 2, set up dialling bars, call assignment hunt group,
exchange code none, dial pause none, signal key flash short,
block programming 1.
The following are not reset: Log in mobile units, base-PIN, call
charge factor and total, base bell melody.
