41
Changing basic settings on the base station
Notes:
Setting the tone
length for DTMF
Set tone length
variable (= 1)
or fixed (= 2)
1
2
or
Scroll to menu
item 15 “DTMF
tone length”
Save the
setting
Variable tone length: as long as the key is pressed.
Notes:
Setting the base
station bell
volume
Set the bell volume:
1 = quiet,
3 = loud
1
Scroll to menu item 23
“Base station bell
volume”
If the bell is switched off, calls are only signalled by flashing of
the “In operation” LED.
3
. . .
Save the
setting
Setting the base
station bell
melody
Setting the bell
melody
1
Scroll to menu item 24
“Base station bell
melody”
9
. . .
Save the
setting
Notes:
Setting the dialling
method
DTMF is set for operation in telephone systems at the factory.
Set 1: PD or
2: DTMF.
1
Scroll to menu item
26 “Set dialling
method”
2
. . .
Save the
setting
Setting the
dialling bar
Notes:
Enter call number
for dialling bar
(e.g. 0180)
1
Scroll to menu item 27
“Set dialling bar 1”
9
. . .
Scroll to
menu
item 28
Scroll to menu item 29 to bar
a second number if necessary
Enter internal numbers of the
mobile units for which dialling
bar 1 is to apply
1
6
. . .
An internal number can be cleared by typing it in again.
No dialling takes place when you attept to dial a number which
is barred for the mobile unit. You hear the busy tone.
