Tennant 8010, Руководство оператора

Страница: 46 / 106

OPERATION
8010 330100 (3--98)
44
5. Unscrew the drain hose cap from the
recovery tank drain access cap.
6. Pull out and place the drain hose next to the
floor drain. Remove the drain end cap from
the hose. Stand back because the solution
rushes out of the drain hose.
ES
t
mode: Unscrew the drain hose cap
from the solution tank drain access cap and
drain the solution tank.
For machines with the positive solution
control drain option, remove the drain cap
and connect the hose. Place the hose end
next to the floor drain and open the drain
valve.
7. Open the tank cover.
8. Spray the inside of the recovery tank. The
recovery tank has two access caps, one on
the side of the machine, and one at the tank
drain.
ES t mode: Flush out the solution tank with
clean water through the fill opening.
9. ES
t
mode: Remove the ES
t
filter from
the recovery tank and clean. Place the filter
back in the recovery tank. Place the drain
end cap on the recovery tank drain hose, or
close the drain valve. Then add enough
water to the tank to cover the outlet filter and
operate the ES
t pump to flush the ES t
system.
05914
10916