ENGLISH
EN
750 (08–02)
15
CARPET CLEANING (OPTION)
The machine can be used to clean carpet with the use
of an optional carpet cleaning floor tool (See
OPTIONS).
1.
Connect the fill–hose (supplied with machine) to the
water faucet and fill the tank with 57 liters of hot
water, 60
°
C maximum temperature.
DO NOT ADD CLEANING AGENTS TO
SOLUTION TANK, certain cleaning agents may
damage pump. Use a pump–up sprayer to apply the
cleaning agent mix to the carpet.
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
2.
Use the equipped vacuum and solution hoses and
connect them to floor tool and then to front of
machine (Figure 32).
FIG. 32
3.
Turn the cleaning agent on/off lever to the ( I )
position, located at the front of the machine
(Figure 33).
FIG. 33
4.
Activate the pump switch and press the
vacuum/blower switch towards the vacuum
symbol (Figure 34).
FIG. 34
5.
Operate the floor tool as normal (Figure 35).
WARNING: Do Not Pick Up Flammable
Materials Or Reactive Metals.
FIG. 35
6.
After cleaning, relieve the water pressure from the
tool before disconnecting the hose. Squeeze the
trigger for five seconds after turning switches off.
7.
Perform the recommended maintenance
procedures (See MACHINE MAINTENANCE).
