EN
ENGLISH
10
750 (08–02)
3.
Turn the cleaning agent on/off lever to the on
position ( I ), located at the front of machine
(Figure 10).
FIG. 10
NOTE: To operate spray gun at LOW PRESSURE
without the use of cleaning agent, turn the cleaning
agent on/off lever to the (O) position.
4.
Adjust the gun to low pressure by pushing the
spray nozzle outward. Turn the spray nozzle
counter– clockwise for a fan spray pattern
(Figure 11).
FIG. 11
5.
Activate the pump switch. Press the
vacuum/blower switch towards the vacuum
symbol if using the gulper tool (Figure 12).
FIG. 12
6.
Starting at the furthest point in room, begin spraying
the entire area from bottom to top working towards
the machine. The cleaning agent (Formula 710) may
take up to 5 seconds before it starts to inject. After
spraying the entire area, turn the machine off and
allow the cleaning agent to work for 5–10 minutes
(Figure 13).
FIG. 13
NOTE: It may take the pump 5–10 seconds to prime.
Nozzle must be set at low pressure in order for pump
to prime.
FOR SAFETY: When using machine, do not spray
solution into electrical outlets, switches, fuse
boxes or on electrical appliances.
NOTE: After applying cleaning agent, turn the
cleaning agent on/off lever to the (O) position and
rinse the gun of cleaning agent.
7.
While the cleaning solution is working, use the
brush tool to scrub corners, cove base and heavily
soiled areas (Figure 14).
FIG. 14
