EN
ENGLISH
8
750 (08–02)
FILLING SOLUTION TANK
1.
Remove the front solution tank lid from the machine
and pour “Formula 720 Rinse” agent or an approved
substitute into the solution tank. Follow the mixing
instructions on the bottle (Figure 4).
FIG. 4
“Formula 720 Rinse” agent is specifically designed and
recommended for use in this machine. It is intended to
be used for rinsing surfaces after cleaning. The
“Formula 720 Rinse” agent will reduce water spotting
and speed up drying time. To order the “Formula 720
Rinse” agent or an approved substitute, contact your
Tennant supplier.
ATTENTION: Use of unapproved or inappropriate
chemicals may cause damage to machine and
surfaces and could void your warranty
FOR SAFETY: When using machine, follow
mixing, handling, and disposal instructions
provided on chemical container instructions and
Material Safety Data Sheets (MSDS).
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
2.
Connect the fill–hose (supplied with machine) to the
water faucet and fill the solution tank with 57 liters of
clean water (Figure 5). If using hot water, do not
exceed 60
°
C.
FIG. 5
3.
Replace solution tank lid after filling.
CONNECTING POWER CORD TO WALL OUTLET
1.
Connect the power cord into a grounded wall
outlet (Figure 6). Use a wall outlet outside the area
to be cleaned.
Grounded Outlet
Grounding
Edge/hole
FIG. 6
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug Power
Cord Before Servicing Machine
If the supply cord is damaged or broken, it must
be replaced by the manufacturer or it’s service
agent or a similarly qualified person in order to
avoid a hazard.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
