Tennant 186E, Руководство оператора

Страница: 23 / 86

OPERATION
2Ć11
186E MM160 (6–94)
SOLUTION LEVER
The solution lever is present on machines with the
scrub attachment option. It controls the flow of
solution to the floor.
To start solution flow, push the lever to the right
near the “on” position. Solution flow increases as
the lever is pushed to the right. To stop solution
flow, push the lever to the left into the “off”
position.
SIDE BRUSH ARM
The side brush arm controls the position of
the side brush.
To raise the side brush, pull the lift arm up and
push it back into the raised position. To lower the
side brush, pull the arm forward and release it into
the down position.
When parking the machine, always raise the
brush to prevent the brush bristles from taking a
set.
A
03135
RAISING SIDE BRUSH ARM
A. Side Brush Arm
THERMO-SENTRY
The Thermo-Sentry is a thermostat that senses
the temperature of the air drawn into the vacuum
fan from the hopper. The thermostat controls a
motor shut off switch. In the event of a fire in the
hopper, the high air temperature would cause the
thermostat to trip, stopping the motor cutting off
air flow to the fire. After the thermostat has
tripped, it must be manually reset by pressing the
reset button on the sensor.
A
03152
THERMO-SENTRY
A. Thermo-Sentry