(8)
AAA
(3)
(7)
(10)
AAA
(2)
(1)
(5)
(4)
(9)
(6)
Make sure that the products is commissioned properly. Adhere to the instructions in
this operating manual.
Never pour liquids over the gas-leak detector. This may damage the device. If this
occurs accidentally remove the batteries immediately.
Do not expose the device to high temperatures, dampness or strong vibrations, nor
to high humidity.
Avoid serve mechanical stress. The gas-leak detector is equipped with high-quality
electronics and is, therefore, very sensitive to impact, mechanical shock etc., which
may destroy the gas sensor. Furthermore, the gas sensor (1) may be damaged or
destroyed by blowing strongly and directly onto it, or by moisture.
Handle the gas-leak detector with care.
If you are not sure about the operation, safety or connection of the devices, please
contact a qualified engineer.
Keep the device out of reach of children.
Control elements
(1)
Gas sensor
The sensor is the heart of the gas-leak detector. It recognizes gas and transforms
this information into electrical impulses gas and transforms this information into
electrical impulses which ca be read out by the analysis electronics
(2)
Gas display LED
This LED shines when the device triggers an alarm due to the detection of gas.
(3)
POWER display LED
This LED shines when the device is switched on and the batteries still have
sufficient capacity.
The LED does not shines when the batteries are too low or flat.
(4)
STATIC display LED
This LED shines as soon as the device recognizes a static discharge.
(5)
Circuit breaker/circuit closer(ON/OFF)
This switches the device on and off. In the “ON” position the device is switched on
and in the position the device is switched on and in the “OFF” position the device is
switched off.