www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <7>
V1.0
22/08/18
*Measuring Value = Reading Value - Open Circuit Value (should be <20 digits)
5. Temperature Measurement
Range
Resolution
Accuracy
-40 ~ 20°C
1°C
- (8% Reading + 5 Digits)
>-20 ~ 0°C
±4
>0 ~ 100°C
±(1.0% Reading
+ 3 Digits)
>100 ~ 1000°C
±(2.5% Reading + 2 Digits)
Overload Protection
: 600V AC or DC.
Enclosed point contact K-type thermocouple can only be on less than 230°C temperature measurement.
6. Diode, Transistor
Function
Range
Resolution
Remark
Diode
1mV
Display positive voltage decline
Continuity Test
Function
Range
Resolution
Remark
Continuity Test
1Ω
<10Ω Buzzer beep continuously
Overload Protection
: 600V AC or DC.
7. Maintenance and Service
Warning:
Make sure the test leads take off the terminal and the circuit as well as power off the meter if want to open the meter
cover.
1. General Service and Maintenance
•
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
• Any abnormal on the meter, stop use the meter and return to service center.
•
When need to have calibration on the meter, please allow certified engineer or specific service center for the service
maintenance
2. Replacing the battery and fuse, see diagram
Warning
LCD Display “
” sign indicating battery will be run out and need to replace a new battery, if fail to do that. It causes the variance
of the measuring result.
Battery Specification
: 9V 6F22 or NEDA 1604 or 006P