599 / Eagle Users manual
Release 1.002 – September 27, 2010
27
Part #74447
Printed in USA
TRANSMITTER
RF Power Output:
Adjustable, 5-100 W, +/- 1 dB
CW & SSB Duty Cycle:
continuous service @ 100W
AM,FM,AFSK,PSK Duty Cycle:
continuous service @100W, 50% duty cycle (Tx/Rx)
AM TX Bandwidth:
6k
Microphone Input Impedance:
>10 k-ohms at 1 kHz
Microphone Sensitivity:
1 mV RMS for full power output, internal gain adjustment, 9v dc power for
electret elements
FM Deviation:
+/- 5 kHz peak nominal
AUX Level Input:
variable, 200mV nominal
SSB Carrier Supression:
> 70 dB
Unwanted Sideband Suppression:
> 60 dB at 1 kHz
Harmonic & Spurious Outputs:
<-50dBc @100 W <30MHz; -60dB >30MHz; -43 dB <5 W
T/R Switching:
PTT or VOX on SSB, AM, FM, QSK on CW
CW Keyer Type:
Internal Curtis Mode B
CW Rise and Fall Times:
5ms
CW Offset:
adjustable
CW Keyer Speed:
5-60 WPM, adjustable weighting
Current Drain:
transmit 20 amps typ.
Third Order Intermod:
Better than 25dB below peak
SSB Generation:
DSP Generated
# of DSP generated TX bandwidths:
3 built-in DSP filters - automatically selected based on mode – for
CW/SSB = 2.4Khz; for optional AM = 6Khz; for optional FM = 12KHz
(Note, this also means that the 6KHz filter is required for AM transmit, and
the 15KHz filter is required for FM transmit, otherwise transmit is not
permitted)
ANTENNA TUNER
Type:
Reversible L-network
Matching frequency range:
160 to 10 Meters, no Six Meters
Matching impedance range:
10:1 SWR typical
OPTIONS
4 Pole Roofing Filters:
2.4K standard, optional = 300, 600, 1.8k, 6k, 15k
Noise Blanker:
daughter board module
