599 / Eagle Users manual
Release 1.002 – September 27, 2010
26
Part #74447
Printed in USA
RECEIVER
SSB Sensitivity:
0.5uV, 2.4khz, 10dB SINAD, preamp off
AM Sensitivity:
1.3uV, 30% Mod, 6kHz BW, 10dB SINAD, preamp off
FM Sensitivity:
2.2uV, 5kHz Dev, 16kHz BW, 10dB SINAD, preamp off
Selectivity IF1:
2.4khz standard, 9.0015 MHz, 2 options
Selectivity IF2:
30 KHz Lowpass filter
Selectivity, DSP IF:
127 built-in DSP filters from 100-15000 Hz BW.
IP3 (Third Order Intercept Point):
21.5dBm/20kHz tone separation, 19.5dBm/2kHz, preamp off
IMD3 Dynamic Range:
100dB/20kHz, 99dB/2kHz, 300Hz BW, preamp off
Blocking Dynamic Range:
141dB/20kHz, 130dB/2kHz, 500 Hz BW, preamp off
LO Phase Noise:
-132dBc/Hz@20kHz, -121dBc/Hz@2kHz
Noise Floor:
-137dBm/300Hz BW, preamp on
Image Rejection:
1st IF: >90dB/HF bands,>70dB/6M
2nd IF:
>73dB
IF Frequencies:
1st:9.0015 MHz, 2nd:22.5 kHz, 3rd:0Hz (DSP)
IF Rejection:
>70dB
Other Spurious Response Rejection
Rejection: >80dB; Birdies: <-100dBm equivalent*
Pass Band Tuning:
+/- 2.1kHz, 5Hz steps. Small dead zone for centering
Attenuator:
10 db
PreAmp:
12 db
Audio Output:
2W into 4 ohms, <3% THD
RIT range:
+/- 8.2 kHz
RIT Step size:
10Hz
S-Meter Reference:
S9 = 50 uV RMS
TX>RX Recovery Time:
< 20 ms
RX Headphone Output:
Designed for 16-32 ohms impedance headphones. Usable at 8 ohms
AUX Audio Output:
500 mv
Auto Notch:
IF DSP, multi-tone
RX Noise Reduction:
IF DSP, adjustable
Noise Blanker:
Optional HW, 2 levels of blanking
RX Current Drain:
1.25 Amps
# of IF DSP Filters:
127 built-in DSP filters from 100-15000 Hz BW.
General Coverage Receive:
degraded specs outside ham bands
