Temsa TS 35, Электроника и руководство по проводке

Страница: 19 / 257

TEMSA Note:
00
00B-3 TS35
00.2.4 Wire Code Definitions
Wire characteristic as illustrated in Figure A.
• Background: White
• 25-01 : Wire Code
• 2,5 : Wire Size 2,5 mm
2
If there is not any number in parenthesis, wire size
is 1mm
2
.
25-01A 25-01B
25-01
25-01
Wire characteristic as illustrated in Figure B
Wire size is indicated with the cross sectional area
of conductor.
2.5RW
2,5: Cross sectional area of conductor is 2,5 mm².
RW: Background colour is RED, Stripe colour is
WHITE
No wire size is shown for a shielding wire but is
marked with “SHIELD” and wires encased in the
shield are shown in anellipse of line.
A B C D E
Shield
Isolation of Conductor
Wire core Conductor (+)
B (Stripe)
W
Background
Colour
2,5RW
Stripe Colour
Background colour
Wire Size
25 - 01 (2,5)
Wire Size
Wire Code
Background
(White)
( )
Shield wires are indicated as shown bellow (Figure C)
to distinguish them from other wires.
Wire colours are shown with the capital letter of
each colour.
When the capital letters of the colours are the same,
they will be identified as follows:
R Red
L Blue
Br Brown
Where a stripe is added to the wire colour, a combi-
nation of two capital letters is used.e.g. :
RY (Yellow stripe on red background)
WB (Black stripe on white background)