Tempsens CALsys 250, Руководство пользователя

Страница: 5 / 38

CALsys 250
5 | P a g e
Before connecting to the electricity supply, please familiarize yourself with the
parts of the calibrator with the help of operating manual.
Always replace the fuse with one of the same rating, voltage and type.
Use only the mains power cord and connect or approved for the voltage and plug
Configuration in your country and rated for the Product.
Replace the mains power cord if the insulation is damaged or if the insulation
shows signs of wear.
Connect one end of the supplied ground wire to the protective earth ground
terminal on the rear panel and the other end to an earth ground.
Make sure the ground conductor in the mains power cord is connected to a
protective earth ground. Disruption of the protective earth could put voltage on the
chassis that could cause death.
Do not put the Product where access to the mains power cord is blocked.
Do not use an extension cord or adapter plug.
Do not use the Product if it operates incorrectly.
Make sure the power cord does not touch with hot parts of the Product.
HEALTH AND SAFETY INSTRUCTIONS
Wear appropriate protective clothing.
Operators of this equipment should be adequately trained in the handling of hot
and cold items and liquids.
Do not use the apparatus for jobs other than those for which it was designed, i.e.
the calibration of thermometers.
Do not handle the apparatus when it is hot (or cold), unless wearing the
appropriate protective clothing and having the necessary training.
Do not drill, modify or otherwise change the shape of the apparatus.
Do not use the apparatus outside its recommended temperature range.
If cased, do not return the apparatus to its carrying case until the unit has cooled.