Templari KITA L Cold, Руководство по установке и обслуживанию

Страница: 6 / 68

6
www.templari.com
1 Introduction
This guide wants to give every information necessary to the
installation and the correct funtioning of the heat pump KITA
Templari®, from its put in action during its whole life cycle . The
document is divided in chapters, in each of them there are general
information and mode of the operations to be performed.
1.1 General warnings
• The choice and the use of the unit to serve the conditioning
system have to be made by a competent staff according to
the current regulations in place so to completely satisfy the
requests of the system.
• The installation, the put in action and the maintenance
have to be made by a competent staff able to evaluate the
possible presence of risk factors or malfunction of the
machine.
• The unit is supplied complete with all the options and the
operations directly by the constructor, every manumission
of the fridge part or the software aren’t allowed. Any
manumissions will make fall the operations of the machine
and constructor’s responsibility.
• Periodic inspections and a proper manintenance of the
heat pump KITA Templari®, can avoid damages to the unit
and possible costs for repairs.
• The warranty expires in case of installation not complying
the specifications.
• Keep this guide with the necessary diagrams in places
easily accessible.
• In case of malfunction verify the error code on the control
panel, if necessary contact the installer; if necessary
require original spare parts.
• On the label of the heat pump
KITA Templari® you can
find all the information in relation to current regulations of
labeling, in particular you can find:
• Power to the machine in tension e frequency;
• Thermal power in heating and cooling schemes;
• Maximum power absorption;
• Sound power level;
• Refrigerant used.
1.2 Recommended equipment
• Set of star and shear e screwdrivers;
• Nippers;
• Scissors;
• Set of wrenches or pipe wrench;
• Ladder;
• Hydraulic material for thread gasket;
• Electric equipment for connections;
• Protective gloves;
• Tester and current clamp;
1.3 Series description
The series of the heat pumps KITA Templari® presents monoblock
water heat engines for the production of heating and cooling
thermal energy and the production of domestic hot water with
the best technologies in the market.
The heat pump
KITA Templari® is a series of machines full-
inverter that is with high performance components and widely
dimensioned to privilege the efficiency of the machine. One
more particularity is the implementation of EVI technology
(Enhanced Vapour Injection) in models KITA L, L42 and L66,
that broaden the field of work and the power output to the
heat pump. The use of the gas R410A permits to reach high
performances and a low environmental impact. The presence of
two electronic valves, reversing valve, pressure transducers and
temperature sensors ensure, through the software integrated in
the electronic board as microprocessor, the full functionality and
reliability of the machine in the different operationg regimes.
The control of the machine is done through a remote control that
permits to monitor the operation of the machine and change
the temperature set of the water produced and the mode of
operation (summer/winter).