TEMA TELECOMUNICAZIONI
IP PoE Multicast Encoder
AD615/SIP
MAS-AD615SIP-REV00EN
Page 17 of 28
8.3. Network parameters
On this page it is possible to set the network parameters, such as IP address, netmask, etc.:
The default IP address of the device is
192.168.0.10
. Gateway and DNS are only needed if you want the device to
have the ability to access the Internet (for example to get the current date / time, in the example from the site
ntp1.inrim.it).
The changes to the network settings are taken over by the device until the next reboot. Once you have completed
the configuration steps so be sure to reboot the system and if necessary, change the network segment of your
computer so that it can connect to the new address.
•
IP address
: specify the IP address you want to assign to AD615/SIP.
•
Subnet mask
: indicate the subnet mask to be assigned to AD615/SIP.
•
Default gateway
: indicate the gateway that can enable AD615/SIP to access to internet.
•
Primary and secondary DNS server
: indicate the addresses of two DNS servers you want to use to resolve
IP addresses.
•
Time server
: indicate the address of the server you want to use for time synchronization device.
•
Test address (ping)
: if inserted, this address is used by the system to verify the correct operation of the
network connection.
•
Device description
: optional, is the description that appears on the net with the search tool Tema “ADAM
Audio Domain & Access Management” a very useful software for the centralizad management of all
devices IP Audio series AD600 and IP Intercom series AA-500/600.
