52
There are two types of operations with Permanent I/O elements: simple
monitoring and event generating. Monitoring method is used when current I/O
information needed with regular GPS coordinates. Event generating method is
used when additional AVL packet is needed when current value of I/O exceeds
predefined High and Low levels. I/O settings allow defining I/O event criteria.
6.3.3.5.2
I/O configuring
I/O configuration has 7 main parts (Figure 36):
Figure 36 FM6320 I/O Configuration (1)
Table 25 I/O Configuration window description
Pos.
Nr.
DESCRIPTION
1.
Property inputs list
2.
Enable/Disable chosen property input - allows enabling I/O element so it is added to the
data packet and is sent to the server. By default, all I/O elements are disabled and
FM6320 records only GPS information.
3.
Priority - AVL packet priority. There are Low, High, Panic, SW21, SW22, SW23 and SW24
priorities. Regular packets are sent as Low priority records. When low priority event is
triggered, FM6320 makes additional record with indication that the reason for that was
I/O element change. When High priority is selected, module makes additional record
with high priority flag and sends event packet immediately to the server. First it tries to
send it using GPRS. If GPRS fails, it doesn’t send AVL packet using SMS mode, if SMS is
enabled in SMS settings. Panic priority event forces module to send AVL packet to server
via GPRS and if GPRS fails, it sends AVL packet using SMS mode, if SMS is enabled in SMS
settings. Then it switches its operating profile to Profile 4 (for details see chapter 7.2).
SW2X priorities switch profiles on event (SW21 – Profile 1, SW22 – Profile 2 and so on).
Содержание FM6320
Страница 1: ...FM6320 User Manual V1 13...