Teltonika FM1120, Руководство пользователя

Страница: 31 / 88

31
GSM settings, Operator list
Operators list – FM1120 can work in different modes (use different settings) according to
the operator list defined. Operator list is used for Data Acquisition Mode switching (see chapter
5.12 Data Acquisition Mode settings for more details). Modes are changed based on GSM
operator FM1120 is connected to.
Figure 23 Operator list configuration
If operator list is left empty, it will allow using GPRS to any GSM operator. Please note that
FM1120 will work in Unknown mode only (make sure it is configured to allow data sending –
GPRS context is enabled).
5.12 Data Acquisition Mode settings
Data Acquisition Modes are an essential part of FM1120 device, it is also highly
configurable.
By configuration user defines how records will be saved and sent. There are three different
modes: Home, Roaming and Unknown. All these modes with configured data acquisition and
send frequencies depend on current GSM Operator defined in Operator list (see section 0) and
are switched when GSM operator changes (e.g. vehicle passes through country boarder).
If current GSM operator is defined as Home Operator, device will work in Home Data
Acquisition mode, if current operator is defined as Roaming Operator, device will work in
Roaming Data Acquisition mode, and if current operator code is not written in Operator list (but
there is at least one operator code in the operator list), device will work in Unknown Acquisition
mode.
This functionality allows having different AVL records acquire and send parameters values
when object is moving or stands still. Vehicle moving or stop state is defined by Stop Detection
Source parameter. There are 3 ways for FM1120 to switch between Vehicle on Stop and Vehicle
Moving modes see section 5.7.
FM1120 allows having 6 different modes. Operational logic is shown in Figure 24.