Teltonika FM1120, Руководство пользователя

Страница: 25 / 88

25
5.5 CONFIGURATION
5.6 Configurator
New FM1120 module has default factory settings. Settings should be changed according to
your application and your GSM operator information.
FM1120 configuration is performed via FM1120 Configurator program. FM1120
Configurator version can be downloaded from http://avl1.teltonika.lt/downloads/FM11YX/ .
Contact sales manager to get the latest FM1120 Configurator version. FM1120 configurator
operates on Microsoft Windows OS and uses MS .Net Framework 3.5 or higher. Please ensure
that MS .Net Framework 3.5 or later is installed on your PC before starting configurator. Latest
MS .Net Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable. Configuration process starts from
starting FM1120 Configurator program and then connecting to FM1120 device via Connect
button located on the top left corner of configurator. If connected successfully IMEI, Version
fields which were empty, now are filled with certain numbers depending on Modem IMEI and
firmware version of your device (figure below).
FM1120 has one user editable profile, which can be loaded from device, and saved. User
can also revert to default settings, by pressing Load Defaults button. After any modification of
configuration settings it has to be saved to FM1120 device, otherwise it will not be written to
device.
FM1120 has 2 configuration modes: Recommended Configuration (Figure 17) and
Advanced Configuration (Figure 18).
Figure 17 Recommended Configuration window