Teltonika FM1120, Руководство пользователя

Страница: 21 / 88

21
Figure 16 Firmware updating processes
When you see a green table like in Figure 16 , it means that the firmware is flashed to
FM1120 successfully. You may now close the update window and start using your FM1120
device.
5 OPERATIONAL BASICS
5.1 Operational principals
FM1120 module is designed to acquire records and send them to the server. Records
contain GNSS data and I/O information. Module uses GNSS receiver to acquire GNSS data and is
powered with four data acquire methods: time-based, distance-based, angle-based and speed-
based method. Note, that if FM1120 loses connection to GNSS satellites, it continues to make
records, however coordinate in these records remains the same (last known coordinate).
Method’s details are described in section5.12. All data is stored in flash memory and later can be
sent via GPRS or SMS. GPRS mode is the most preferred data sending mode. SMS mode is mostly
used in areas without GPRS coverage or GPRS usage is too expensive.
GPRS and SMS settings are described in later sections. FM1120 communicates with server
using special data protocol. Data protocol is described in device protocols documentation.
FM1120 can be managed by SMS commands. SMS Command list is described in SMS
COMMAND LIST section . Module configuration can be performed over TCP or via SMS.
Configuration parameters and modes are described in device protocols documentation. Please
contact Teltonika sale manager to find out more about protocols documentation purchase.