Avanti 3000ip and Avanti 3015ip sets
4-3
From left to right, the connectors are as follows:
P
OWER
CONNECTION
The Avanti IP set may be powered either directly through the
data network (if Power Over Ethernet is enabled) using the
data connector, or by connection to the mains using the 48V
DC power converter provided by Telrad Connegy.
NOTE
When connected through the mains, use only a 48V
DC converter provided by Telrad Connegy.
To connect Power Over Ethernet connect the data cable as
explained below. The same cable provides power and network
connections.
If power connection is done from the mains, plug the 48V DC
converter cable into the socket 48V DC on the back
of the telephone, then connect the converter to the mains.
D
ATA
CONNECTION
Insert the plug of the data cable into the socket marked .
T
ABLE
4-1: A
VANTI
IP
SET
REAR
SIDE
CONNECTORS
Socket
Function
Power (marked
+48V DC)
Power input jack
EXT
Not used.
Data connection to the network
Connection of a PC (optional)
3015ip-3000ip.book Page 3 Friday, September 30, 2005 4:06 PM
Содержание AdvanceIP Avanti 3000ip
