Telrad Connegy AdvanceIP Avanti 3000ip, Руководство пользователя

Страница: 17 / 64

Avanti 3000ip and Avanti 3015ip sets 2-7
telephone set that is not programmed with DN but-
tons. These differences are pointed out in this Guide
for each applicable feature. Consult your System
Administrator for further details about the program-
ming of your telephone set.
Outside line buttons. -
One or more of the buttons on your
telephone may be associated with either specific lines or out-
side line groups. To access a line for dialing outside the system,
press an outside line button.
Floating buttons. -
Calls on outside lines for which no button
has been defined, may be associated with a button just for the
duration of the call. These buttons are called “floating” buttons.
SWITCHING FROM HANDSET
TO HANDSFREE OPERATION
During a call conducted via the handset:
1. Press [SPKR] .
2. Replace the handset and talk via the microphone.
DISTINCTIVE RINGING
You can program telephone sets located close to each other
with distinctive rings, to enable you to identify which telephone
is ringing. Nine different rings are available.
To change the ring of your telephone set
1. Press
[*]
and
[#]
simultaneously.
2. Press one of the dialpad buttons ( [1] - [9] ).
When you hear the ring that you want:
3015ip-3000ip.book Page 7 Friday, September 30, 2005 4:06 PM