Telrad Connegy AdvanceIP Avanti 3000ip, Руководство пользователя

Страница: 44 / 64

3-24 Avanti 3000ip and Avanti 3015ip sets
With each press of the button, the corresponding character
appears on the display.
If you want to enter two characters from the same button on
the dialpad, for example D followed by E, wait two seconds
between entering characters (until you see the cursor “_” at the
next position), or press the
[NEXT] button to indicate you have
finished programming that character.
Enter “Z” by pressing
[9]
four times.
Enter “Q” by pressing [7] two times.
Enter an underline by pressing [1] twice.
Enter a slash by pressing
[1]
four times.
Warning signal.
You hear a three-beep warning tone:
• If you try to access a Phone Book list that you are not
authorized to use;
• If you try to save a name without entering a number for it;
• If you try to add a new name to your private list when you
have no available speed dial bins; or
• If you try to access a list that has no names defined.
Caller ID.
If you receive a call made from a telephone number
that appears in your Phone Book, and if your system supports
Caller ID, the name programmed for that number in the Phone
Book appears on your telephone display, instead of the num-
ber.
3015ip-3000ip.book Page 24 Friday, September 30, 2005 4:06 PM