Telrad Connegy AdvanceIP Avanti 3000ip, Руководство пользователя

Страница: 24 / 64

3-4 Avanti 3000ip and Avanti 3015ip sets
2. Press the DN or outside line button that is flashing green;
you receive the second call.
T
O RETURN TO THE FIRST CALL
(A
VANTI
3015
IP ONLY
)
1. Press
[HOLD]
;
2. Press the flashing DN button.
NOTE
If your telephone does not have DN buttons, you can-
not put an internal call on hold. This means that you
cannot answer another arriving internal call without
disconnecting the first internal call. In this case, you
must hang up first. You can then answer the second
call when it rings.
OUTSIDE CALLS
Outside calls may be placed by accessing an outside line or by
using the Least Cost Routing (LCR) feature.
To access an outside line, you may:
• Dial an outside line number, an outside line group number
or the LCR access code (usually 9);
• Press an outside line or outside line group button (Avanti
3015ip only);
• Press the LCR button on the Avanti 3015ip (if programmed).
Depending on system programming, the cost of your call may
be displayed briefly at the end of the conversation.
T
O PLACE AN OUTSIDE CALL
1. Obtain an outside line.
3015ip-3000ip.book Page 4 Friday, September 30, 2005 4:06 PM