* Emergency stop: see chapter 2.1
3
1.0
INTRODUCTION.
TELLEFSDAL A.S congratulates you with the choice of AUTO WRAP bale wrapping machine. We
are certain you will be satisfied with the machine, and that you will have the pleasure of your
investment for many years.
The AUTO WRAP bale wrapping machine has more features than any other bale wrapping machine
available. AUTO WRAP can pick up the bale, wrap and stack them without the operator leaving the
tractor cab. This system is protected by patent law's almost world wide.
AUTO WRAP is hydraulically driven by the tractors hydraulic system, and is controlled from the tractor
cab by a remote control unit. The machine can either be mounted to three point linkage, front
mounted with quick-couplers to the tractors frontloader or on a wheel loader. Then it's possible to
stack the bales upon each other.
AUTO WRAP 1510 is designed to wrap bales of grass, hey or straw, with nominal diameter of 4-6 ft.
(120 -180 cm), and weights up to lbs. (1500kg).
The AUTO WRAP 1514 is essentially the same machine as the AUTO WRAP 1510, but with a
patented special mounting for the rollers so that square bales can be wrapped.
The AW 1514 can wrap both square and rectangular bales, from 60 x 60 to 120 x 120 x 150 cm.
It can take bales of up to 1,200 kg. It can also wrap round bales of up to ø1200 mm.
Both the AW 1510 and 1514 can also be supplied as TWIN models, i.e. the machines are
equipped with two film stretching units and two cutters. This gives the machines a significantly
increased capacity.
The machine is developed and has been improved since the beginning in 1986, and is now a very
reliable and safe machine with high security built in.
This manual is meant to explain how AUTO WRAP is prepared, mounted, used and how it works, and
shall together with the spare part's list be a reference for maintenance and troubleshooting. So take
good care of the books, they are a part of the machine.
Read carefully through this manual, and specially chapter 2.0, safety instructions, before starting the
machine, and follow the instructions thoroughly. If problems should occur, check with chapter 17.0,
and try to find out what is wrong. Ask your dealer for advice before you make the problem worse than
it is. See also chapter 19.0, conditions of warranty.
AUTO WRAP
1510
1514
1510 / 1514 TWIN
Height in working
position
Width, min. / max.
Length, min. / max.
Weight
Wrapping arm speed,
recom.
Wrapping arm speed,
max.
Bale size, max.
Bale weight, max.
Capacity
Prestretcher
Hydraulic connection
Oil pressure / amount,
min.
Oil amount, max.
Counter pressure, max.
Electric connection
2820 mm (9'3")
1520 / 3000 mm (5' / 10')
2450 / 3000 mm (8' / 10')
780 kg (1720 lbs)
22 rev. per minute
27 rev. per minute
ø1800 mm (6')
1500 kg (3300 lbs)
Approx. 25 bales per hour
500 / 750 mm (20" / 30")
1 single work. +free return
180 bar / 25 litres/minute
60 litres per minute
10 bar
12 V DC
2960 mm (116")
1520 / 3000 mm (5' / 10')
2450 / 3000 mm (8' / 10')
780 kg (1720 lbs)
22 rev. per minute
27 rev. per minute
ø1800 mm (6')
1200 kg (2650 lbs)
Approx. 25 bales per hour
500 / 750 mm (20" / 30")
1 single work. +free return
180 bar / 25 litres/minute
60 litres per minute
10 bar
12 V DC
2960 mm(116")
2440 / 3215 mm
2540 / 3425 mm
950 / 1100 kg
22 rev. per minute
27 rev. per minute
Same as std. maskin
Same as std. maskin
Approx. 40 bales per hour
500 mm (20")
1 single work. +free return
180 bar / 25 litres/minute
60 litres per minute
10 bar
12 V DC
TELLEFSDAL A.S reserves the right to alter the product and/or its technical specifications without
prior notice, and without this entitling any alterations to previously supplied products.
© All rights in pursuance of the Copyright Act shall apply, and any reproduction of the contents of this
booklet, in whole or in part, is forbidden without the permission of TELLEFSDAL A.S.
Reservation is made for possible printing errors.
