* Emergency stop: see chapter 2.1
14
Fig. 4-6
Fig. 4-7
4.4
MOUNTING OF RELIEF ROLLER.
At last the relief roller under the machine has to be mounted. When the machine has been mounted
on the tractor, lift it clear of the ground, and secure it from falling down before working underneath
the machine. Mount the relief roller with 2 pcs. M12 x 120 bolts, washers and lock nuts. (See fig. 4-6).
The off-loading roller can be fitted at three different heights. On the Auto Wrap 1510 it is fitted at the
top position as illustrated on the right in fig. 4-7. (The locating bracket must be turned 180
E
)
On the Auto Wrap 1514 it is fitted at the centre position if rectangular bales (for example, 90 x 120
cm) are to be wrapped. For bales which are squarer than this, it is fitted at the lower position.
