T. E. L. L. SOFTWARE
HUNGÁRIA KFT
21
Attention!
Make sure you do not specify the same server with external and local IP as well, because in
this case the transmission will not work properly.
Configuration example
From the servers up to 6 server groups can be created, which can be assigned with events later. By
creating groups, you can separate alarm events from technical events for example. In each server group
you can set which servers are primary and which are backup.
Figure 15. Server groups
Servergroup name:
You can give a name to each server group. (e.g..: Alarm, Technical issues)
#:
Index number within the group
Server:
You can assign a server to a group by selecting it from the dropdown menu.
Primary server:
Set with the checkbox which server is primary and which is backup. There can be more than
one primary server. The signal will be sent simultaneously to each of them. The signal will be sent to the
backup servers only if none of the primary servers were available. If there are multiple backup servers, the
module sends the signal to them in order.
Add server:
You can add server to a group by selecting the servergroup and
p
ressing the „ADD MORE” button a
t the bottom of Servers page.
Delete server:
Use the dust bin icon next to the server to delete it from the group.
