7
2.4.2 Setting the phone numbers
1) Press the Settings
key continuously for at least 5 seconds, then
“
PASS
”
is displayed on the digital display
2) Enter the user password using the 1-4 function keys (the password is: 1111)
3) Press the Settings
key intermittently in the settings mode, until the ”TEL”
LED becomes lit green
4) The LED found above the function key (1-4) is lit if there is already a phone
number stored in the given memory section
5) Keep pressed for 3 seconds the function key (1-4) to which memory section
you wish to add (or modify) a phone number, then “-“ is displayed on the
digital display if this section is empty, or the phone number stored here
previously. The LED above the given (1-4) key flashes green to indicate to
which section the setting is in progress, while the “TEL” LED is lit red
6) Enter the phone number digit by digit using the
keys. You can shift
to the next digit by pressing the Settings
key
7) After entering the phone number, keep the Settings
key pressed
continuously for 3 seconds to save
8) To add new phone number, return to step 5
9) When finished, press Cancel
key to exit the programming mode.
The ”TEL” LED is lit green continuously to indicate that there are phone
numbers set.
Erasing phone numbers:
1) Press the Settings
key continuously for at least 5 seconds, then “
PASS
”
is displayed on the digital display
2) Enter the user password using the 1-4 function keys (the password is: 1111)
3) Press the Settings
key intermittently in the settings mode, until the ”TEL”
LED becomes lit green
4) The LED found above the function key (1-4) is lit if there is already a phone
number stored in the given memory section
5) Keep pressed for at least 5 seconds the function key (1-4) from which memory
section you wish to erase a phone number. The LED found above the given
key turns off and the display indicates ”- - - -”
(To view the whole phone number, you can scroll the digits of the selected
phone number using the
keys)
6) To erase further phone numbers, return to the previous step
7) When finished, press Cancel
key to exit the programming mode. If you
have not erased all the phone numbers, the ”TEL” LED remains lit green
continuously to indicate that there are phone numbers set.
