20
3.4 Management of the settings
You can easily manage and archive your settings with the seven buttons found on the
upper section of the „
Parameters
” menu.
The functions of the seven buttons, from left to right:
Read parameters from file
,
Save
parameters to file
,
Save parameters to file in printable format
,
Read parameters
from module
,
Upload parameters to module, Compare parameters with the module
and
Change module password
.
After you have finished configuring the parameters, upload the settings to the module by
pressing the upload button. The upload/download progress is indicated on the progress
bar found at the bottom of the software window. The new settings are activated only after
the upload is successfully completed.
3.5
Changing the module’s password
To change the module
’s password, click on the “lock”
button, then fill out the text
fields and click on
OK
button.
Attention!
The module’s password is different from the password used to enter the user
settings. The module’s password protects the software settings against unauthorized
access.
The user password does not change by changing the module’s password, it
always remains the default 1111, and it serves only for preventing the user from entering
the settings menu accidentally.
In case y
ou forgot the module’s password, you cannot change it, therefore you have to
reset the module to its default state, which operation will also reset the password to the
default 1111.
Warning! In case you reset the module, all previously configured parameters will
be reset to default values, which means all the settings and recorded reminders
will be erased.
3.6 Resetting the module
To restore factory default settings, do the following:
Switch the module to SLEEP mode according to the instructions found in chapter 2.1
Keep pressed the Settings
and Cancel
keys at the same time
Power up the module (connect the power adapter)
Release the keys kept pressed
“
rES.
” Is displayed for 2 seconds on the digital display, then the settings are erased.
