15
3.3.1 Settings
The “
Settings
” menu makes possible the configuration of GSM call parameters, status
reporting and daily reminders.
State reports:
o
Temperature min/max values:
a minimum and a maximum temperature limit
can be configured between 0 and 50
ºC. If the module’s environmental
temperature drops below the minimum value or increases above the maximum
value, the module generates the corresponding event and initiates call and/or
sends SMS according to the settings.
Attention!
The device measures the temperature with approximate accuracy,
the measured value may differ with +/-5
ºC from the real temperature.
o
Test report frequency:
it can be configured in hours between 1 and 168, how
often the module should send a periodic test report message, expediently in
SMS. This report serves for checking if the device operates.
o
Test report time:
the module sends the first periodic test report at the time of
day set here, thereafter with the configured frequency
Voice call settings:
o
Phone numbers for incoming/outgoing calls:
four phone numbers
can be
configured from which the module accepts incoming calls and to which calls can
be initiated. When receiving a call, the module answers automatically in
hands-free mode after the configured number of rings, this way makes possible
the conversation with the person staying near the device. Outgoing call occurs
when an emergency alarm is initiated, and speed dialing of phone numbers 1-4
is also possible.
