DE910 Series Hardware User Guide
1vv0300951 Rev.9 – 2015-05-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 62 of 77
13.3.
Recommended foot print for the application
144 pins
< Top View >
In order to easily rework the DE910 it is suggested to consider having a 1.5 mm placement
inhibit area around the module on the application.
It is also suggested, as a common rule for an SMT component, to avoid having a mechanical
part of the application in direct contact with the module.
NOTE:
In the customer application, the region under WIRING INHIBIT (see figure) must be clear
from signal or ground paths.
