DE910 Series Hardware User Guide
1vv0300951 Rev.9 – 2015-05-11
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 9 of 77
1.4.
Document Organization
This document contains the following chapters:
Chapter 1: “Introduction”
provides a scope for this document, target audience, contact and
support information, and text conventions.
Chapter 2: “General Product Description”
gives an overview of the features of the product.
Chapter 3: “DE910 Module Connections”
deals with the pin out configuration and layout.
Chapter 4: “Hardware Commands”
How to operate the module via hardware.
Chapter 5: “Power supply
” Power supply requirements and general design rules.
Chapter 6: “Antenna”
The antenna connection and board layout design are the most important
parts in the full product design.
Chapter 7: “USB Port”
The USB port on the Telit DE910 is the core of the interface between
the module and OEM hardware.
Chapter 8: “Serial ports”
Refers to the serial ports of the Telit DE910.
Chapter 9: “Audio Section overview”
Refers to the audio blocks of the Base Band Chip of the
DE910 Telit Module.
Chapter 10: “General Purpose I/O”
How the general purpose I/O pads can be configured.
Chapter 11: “DAC and ADC section”
Deals with these two kinds of converters.
Chapter 12: “Test Pont”
Deals with Test Point.
Chapter 13: “Mounting the DE910 on the application board”
Mechanical dimensions and
recommendations on how to mount the module on the user’s board.
Chapter 14: “Packing System”
Deals with packing system.
Chapter 15: “Application Design Guide”
Deals with the design of host system for download
or upgrade.
Chapter 16: “Conformity Assessment Issues”
provides some fundamental hints about the
conformity assessment that the final application might need.
Chapter 17: “Safety Recommendation”
provides some safety recommendations that must be
followed by the customer in the design of the application that makes use of the Telit DE910.
