S42/ADC/LUA AT Command Reference
80512ST10860A Rev.0
Page 14 of 40
2017-10-06
By setting AT+BNDS the bonded-device list is deleted internally.
The bonding information is stored in the module flash. If your application
does not need to store bonds switch this parameter to 0, to protect the
module flash from unnecessary clear and write operations. Every flash
has a limited number of clear cycles.
+BNDSIZE
Bonded Devices List Size
AT syntax:
AT+BNDSIZE=<value>
This command reduces the number o
f devices (1…4) the bonded-device list can hold.
The S42/ADC/LUA can store up to 4 devices. The default size is
4
.
Modification of this parameter will delete all devices in the bonded-
device list.
Example:
AT+BNDSIZE=1
Limit the number of bonded devices to 1
+BOAD
Bluetooth Own Device Address
AT syntax:
AT+BOAD
This command reads the Bluetooth devices’ own device address.
This command is read only.
