S42/ADC/LUA AT Command Reference
80512ST10860A Rev.0
Page 11 of 40
2017-10-06
3. COMMAND SUMMARY
The description of the commands is structured into the following parts:
General commands
Bluetooth Low Energy (BLE) specific commands
Generic Attribute Profile (GATT) specific commands
The factory-default values of the commands are marked using the bold letter format.
General
&F
Load Factory Defaults
AT syntax:
AT&F<value>
The factory-default values will be loaded.
Value
Description
0
Set all parameters except
bndlist
to factory defaults
1
Set all parameters to factory defaults
When
AT+LEPRIVACY=2
is active (Link Layer Privacy enabled) the
AT&F1
command
generates a new Identity Resolving Key (IRK). This key is used to calculate the local random
resolvable address and exchanged during bonding. By changing the IRK all previously bonded
peer devices are no longer able to resolve the local random resolvable address.
In case of value=1 the non volatile bonding information will be deleted.
