S42/ADC/LUA AT Command Reference
80512ST10860A Rev.0
Page 16 of 40
2017-10-06
The user has to answer this request with the SSP passkey displayed on the remote device.
Example:
SSPPIN 00802507C08D,t2 ?
AT+BSSPPIN 00802507C08D,t2,314546
OK
Receive SSP passkey request
Send SSP passkey response
+BSSPDBG
SSP Debug Mode
AT syntax:
AT+BSSPDBG=<value>
This command allows to enable the SSP debug mode of the device. This mode is required to
trace the SSP Bluetooth connection by using a sniffer.
Value
Description
0
SSP Debug mode off
1
SSP Debug mode on
SSP debug mode is for tracing purposes only and shall be deactivated
for normal operation. Otherwise the connection may be unsecure.
E
Local Echo
AT syntax:
ATE<value>
This command selects the local echo in command mode.
Value
Description
0
or empty
No local echo
1
Local echo on in command phase
H
Disconnect
AT syntax:
ATH
This command disconnects the existing Bluetooth connection.
