S42 Hardware User Guide
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 56 of 62
8.3.3
IC Caution
WARNING:
Changes or modifications made to this equipment not expressly approved by Telit may void
the IC authorization to operate this equipment.
8.3.4
IC RF-exposure Statement
This equipment is portable device. According to RSS-102 Issue 5 §2.5.1 Exemption Limits
for Routine Evaluation – SAR Evaluation Table 1, the allowed distances to the human body
for products implementing the S42 can be calculated as follows. If the intended use
of the end product asks for smaller distances a SAR evaluation has to be made with the end
product.
•
Max. RF output power: Occurs at -40°C at 2402MHz to 2480MHz with +6dBm
•
Antenna peak Gain is +2dBi
•
Resulting max. RF output power is +8dBm = 6,3mW < 7mW
•
Table 1 shows that for 2450MHz the distance at 7mW should be
≥ 10mm
8.3.5
IC Labeling Requirements for the End Product
Any end product integrating the S42/AI must be labeled with at least the following
information:
This device contains transmitter with
FCC ID:
RFRMS42
IC-ID:
4957A-MS42
8.3.6
IC Label Information S42
The S42 shows IC-ID on the product label,
Model:
S42
The IC-ID is:
IC. 4957A-MS42
