Assembly And Maintenance Manual for Telink BLE 1x6 Test System 3.2
AN-18071200-E1
5
Ver 1.0.0
1
Overall Architecture Of 1x6 Test System 3.2
Telink BLE 1x6 Test System 3.2 consists of test bench and mechanical structure.
The test bench includes hardware platform and firmware folder, and it’s provided by
Telink; while customer needs to make the mechanical structure suitable for DUT
(Device Under Test), and connect cables according to the guide in this document.
A set of Test Bench mainly contains the following hardware resources.
1)
A Main Board provided by Telink. Figure 1 shows the correct direction to place
the Main board.
Figure 1
Top view of Main board
2)
Six EVK daughter boards provided by Telink. Each should be burned with the EVK
firmware for test bench.
Telink
for
customer
