SBC AVL 4G
User Manual - Telic AG
Pg 30
Explanation of the configuration profiles
The following options are available:
Timer based sleep mode
Message once per hour
Container / Asset tracking –
Endurance track
Position messages are generated each time the device starts and
stops moving.
- Device stopped moving (1minute without any sensor motion
detection)
- Device started moving (according motion sensitivity level 3)
While the device is moving every 10 minutes a position message is
generated.
Vehicle – high resolution track
– off by motion
Position messages are generated and sent either after 1 km
distance or as soon as the driving direction has been changed
more than 30 deg. Additionally once every 5 Minute a position
message is sent.
Driving long distances will be covered by one position message
each 1km,
driving short distances is managed by generating position
messages each time the driving direction is changed more than 30
degrees.
Full power mode,
every 15 sec.
The device is always on power and sends a message
every 15 seconds
Full power mode,
every 60 sec.
The device is always on power and sends a message
every 60 seconds
Users
By selecting the tab "Users" in the top menu, the tabular overview of all users in your domain will be
shown.
