SBC AVL 4G
User Manual - Telic AG
Pg 2
1
General Terms and Conditions
All information in this documentation has been carefully assembled and checked, but should not be
considered as a guaranteed feature set. The copyright of the related documentation is with Telic AG.
The Telic Logo and the terms Telic, and Telic SBC AVL 4G are brands of Telic AG.
All further names and terms used can be brands or registered brands of their respective owners.
Telic reserves the right to change the included information without notice and doesn’t take
responsibility for errors in the document and/or missing information.
1.1
General Information
This Installation Manual consists of the following chapters:
Chapter
Description
1
General Information
provides basic information such as the conventions for the warning
levels, applicable related documentations, and contact information.
2
Safety
addresses the audience for this manual, the indented use of this device and
safety-related information important to read before using the device.
3
Product Description
provides a brief overview about the functions and features of the
device as well as the available accessories.
4
Operation Setup
guides you with detailed step-by-step-procedures through the process
of commissioning the device.
5
Status Indicators
describes the different LED status.
6
Connect to the Vehicle
provides important instructions about how to install the device
within the vehicle.
7
Configuring the Device
explains how to configure the device for its proper working.
8
Connection to Kentaur
explains how to connect the device to Kentaur and provides an
overview of Kentaur’s graphical interface.
9
Troubleshooting Hints
provides solutions to issues that may occur during operation
setup and active use of the device.
1.2
Contact
Support Hotline
If you need specific technical support, please submit a request at the following link:
