USER GUIDE
USER GUIDE
INTEGRATED HUMAN BODY TEMPERATURE SCREENING SYSTEM
V
IR
ALERT
3
Storage
The instrument should be stored in its packaging, in a dry sheltered area.
The maximum storage temperature is 140 °F (60 °C).
The minimum storage temperature is 32 °F (0 °C).
Refer to the Technical Specification for details of the operating temperature limits.
Unpacking
Check all packages for external signs of damage. Check the contents against the packing note.
Lifting Instructions
Where items are too heavy to be lifted manually, use suitably-rated lifting equipment. Refer to the Technical Specification
for weights. All lifting should be carried out in accordance with local and national regulations.
Return of Damaged Goods
IMPORTANT If any item has been damaged in transit, this should be reported to the carrier and to the supplier immediately.
Damage caused in transit is the responsibility of the carrier not the supplier. DO NOT RETURN a damaged instrument to the
sender as the carrier will not then consider a claim. Save the packing with the damaged article for inspection by the carrier.
Return of Goods for Repair
If you need to return goods for repair please contact our Customer Service Department for details of the correct returns
procedure.
Any item returned to Telguard should be adequately packaged to prevent damage during transit.
You must include a written report of the problem together with your own name and contact information, address, telephone
number, email address etc.
Design and Manufacturing Standards
The Quality Management System of Land Instruments International is approved to BS EN ISO 9001 for the design,
manufacture and on-site servicing of combustion, environmental monitoring and non-contact temperature measuring
instrumentation.
Registered ISO 9001 Management System approvals apply in the USA.
USA Calibration Laboratory: ANAB Accredited ISO/IEC 17025.
UK Calibration Laboratory: UKAS 0034.
National Accreditation Board for Testing and Calibration Laboratories approvals apply in India.
Operation of radio transmitters, telephones or other electrical/electronic devices in close proximity to the equipment while
the enclosure doors of the instrument or its peripherals are open, may cause interference and possible failure where the
radiated emissions exceed the EMC directive.
The protection provided by this product may be invalidated if alterations or additions are made to the structural, electrical,
mechanical, pneumatic, software or firmware components of this system. Such changes may also invalidate the standard
terms of warranty.
Copyright
This guide is provided as an aid to owners of Telguard/AMETEK Land’s products and contains information proprietary to
Telguard/AMETEK Land. This manual may not, in whole or part, be copied or reproduced without the expressed written
consent of Telguard/AMETEK Land.
