Telex TDI, Техническое руководство

Страница: 16 / 22

16
Delay Setup
Figure 8 shows the Delay Setup section of the Per Line Setup window.
TX Delay - The TX Delay may be set from 0 to 1000 milliseconds. This feature delays the TX audio for the
programmed period.
RX Delay - The RX Delay may be set from 0 to 1000 milliseconds. This feature records and stores the RX audio
for the programmed period before sending the packet to the console.
LAM Setup
Figure 9 shows the LAM Setup section of the Per Line Setup window.
LAM Level - LAM Level is the signal level the audio must exceed, in dBm, to trigger the RX indication and packet
generation to the console. Typical LAM levels for RX audio are -30dB.
LAM Time - LAM Time is the time the RX indication and the packet generation continues after the LAM level
threshold is exceeded.
Typical values are 2 to 3 seconds.
Options
Figure 10 shows the Auto Answer Setup section of the Per Line Setup window.
Auto Answer - The IP-223 automatically answers the phone after the number of rings entered into this field.
Auto Disconnect Time - If the LAM level threshold is not exceeded after the Auto Disconnect time has expired, the IP-
223 will automatically place the TDI Onhook to disconnect the call.
NOTE: Once all the options have been set, click Submit to store the options.
FIGURE 8.
Per Line Setup—Delay Setup Section
FIGURE 9.
Per Line Setup—LAM Setup Section
FIGURE 10.
Per Line Setup—Auto Answer Setup Section