TeleWell TW-EF600 Скачать руководство пользователя страница 48

Страница: 48 / 133

Security Mode

WPA / WPA2

Security Mode:

You can disable or enable with WPA or WEP for protecting wireless network.

RADIUS/802.1x:

You can enable or disable the RADIUS service.

WPA Shared Key:

The key for network authentication. The input format is in character style and

key size should be in the range between 8 and 63 characters.

Group Key Renewal:

The period of renewal time for changing the security key automatically

between wireless client and Access Point (AP). Default value is 3600 seconds.

If you want to enable the RADIUS function, check Enable and then do the following settings.

RADIUS Server IP Address:

The IP address of RADIUS authentication server.

RADIUS Server Port:

The port number of RADIUS authentication server here. Default value is

1812.

RADIUS Shared Secret:

The password of RADIUS authentication server.

WPA/WPA2 -PSK

WPA Shared Key:

The key for network authentication. The input format is in character style and

key size should be in the range between 8 and 63 characters.

Group Key Renewal:

The period of renewal time for changing the security key automatically

between wireless client and Access Point (AP). Default value is 3600 seconds.

Содержание TW-EF600






































































































































Результаты поиска

Содержание TW-EF600

Отзывы:

TeleWell TW-EF600, Руководство пользователя, Страница: 48 / 133

Результаты поиска

Содержание TW-EF600

Отзывы: